Main page content
AEMC MN253 is a general purpose AC current probe with voltage output. It is designed for use with DMMs or with measuring instruments with voltage inputs. These probes permit the measurement or recording of current with instruments without current ranges. The voltage output is proportional to the current measured (through the jaws). The AEMC MN253 offers a voltage output of 10mV per amp measured.
The AEMC 6470-B Ground Resistance Meter measures soil resistivity, bonding, earth coupling, and grounding resistance. Measures from 0.01? to 99,000? with an auto-ranging feature to seek out the ideal measurement range test frequency and test current. Very simple to use: Connect the leads, press measure button, and read.
AEMC MN213 is a general purpose AC current probe, which is designed for DMMs and other measuring instruments with current input. It has a 1000:1 ratio and an output of 1mA per Amp in the primary (inside the jaw). The AEMC MN213 has integral 5 ft (1.5m) leads terminated by shrouded banana plugs.
Flir CM44 600V 400A AC Digital TRMS Clamp Meter Commercial Grade is designed to measure up to 400A AC and 600V AC/DC and features Flir’s innovative Accu-Tip design that helps improve amperage measurements on smaller gauged wires.
Yellow Jacket 93580 SuperEvac-8 Deluxe AC Vacuum Pump is a highly dependable 15 micron rated, 2-stage rotary vane vacuum pump.
Byte Brothers CTX590 ProTone Tone Generator and Trace Probe Kit generates strong tone for wire identification and location. The CTX590 tone and probe test continuity and voltage. It is a preferred tool for LAN cable identification and basic testing.
Ideal Industries TL-102 Silicone Test Leads.
Specifications
Proposition 65 Warning for California Residents: This product can expose you to chemicals including Benzene, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
AEMC SL206 SL200 Series AC/DC Current Probe measures low DC or AC from 10mA to 80A. The probe jaws clamp around the conductor under test, allowing current measurements without breaking the circuit. Hall sensor technology senses the magnetic field produced by the current measured, and generates a millivolt DC or AC output signal.
SubSurface Instruments PL-2000 Advanced Underground Cable and Pipe Locator is designed with three active frequencies, two passive frequencies, four operation modes, and both direct connection and inductive capabilities. The SubSurface Instruments PL-2000 features four distinct modes of operation: Peak mode - for the most accurate locating and depth measurements. Null mode - for fast, easy tracking, and left/right indication. Distance mode - Longer distance tracking (up to 1.5 longer).
The Amprobe IR-720 Infrared Spot Thermometer features a 20:1 distance to target ratio with best in class accuracy and response time. Capable of measuring temperatures between -26 Degrees F to 1922 Degrees F or -32 Degrees C to 1050 Degrees C.
Shimpo DT-365 Portable Stroboscope Handheld is designed with high power LED lights that flash synchronously with rotating equipment to artificially show the process frozen or moving in slower motion.
Rugged and Accurate with State-of-the-Art Heated Diode Sensor.
Fieldpiece SRL8 Heated Diode HVAC Refrigerant Leak Detector uses a traditional heated diode detector with a sensor that detects all CFC's, HFC's, HCFC's, and blends. The Fieldpiece SRL8 is designed with a 0.1 oz/yr sensitivity with three adjustable sensitivity settings.
Key Features: