Tramex MRH III KIT Moisture and Humidity Test Kit. The MRH III Kit is a complete package for moisture and humidity measurement of the building envelope, incorporating 3 modes of operation.

Tramex CMEXII BM Moisture Meter Kit. The CMEXII BM Kit is the complete package for moisture testing of hardwood flooring, sub-flooring and concrete floor slabs. It can also be used for relative humidity testing of flooring by either the sub-surface in-situ method (ASTM F 2170) or non-destructive hood method (ASTM F 2420 and BS 5325 and BS 8203). Features Instant readings in non-destructive and wood probe modes, CMEXpert measures up to 7 percent (6.99 percent) moisture content in concrete.

Tramex FM-kit4 Flooring Master Kit Flooring Master Inspection Kit. Tramex FM-kit4 Flooring Master Inspection Kit is a complete package for moisture testing of concrete and wood flooring, giving the user the ability to make an informed decision as to when to install the floor covering and also the capacity to do post installation inspections.

Tramex RWS Kit Moisture Meter Roof and Wall Scanner Kit. Mfg part Tramex Rwsk4p. The RWS Kit is a complete moisture inspection kit for the roofing professional. Deep penetration through non-conductive roofing membranes, Exterior Insulation and Finish System or drywall barrier, using either non-destructive or pin-type instruments, allows the user to accurately and quickly locate and trace leaks back to source.

Tramex CRH Kit Moisture and Humidity Meter Test Kit. Mfg part Tramex CrhKit1. The CRH Kit is a complete inspection package for the flooring professional, allowing non-destructive moisture measurements. Tramex CRH allows storage of readings, in addition to surface or sub-surface humidity testing. Features Non-Destructive moisture measurement of up to 7 percent in concrete in increments of 0.1 percent. RH Probe for measuring simultaneous readings for Humidity (percent RH) in addition to Temperature and Dew Point. Instant readings on clear LCD display.

Tramex CRH Content and Humidity Meter (digital) for flooring. The CRH is a digital, hand held, non-destructive, multi-function moisture meter designed for measuring moisture content instantly in concrete floor slabs and floor screeds. Tramex CRH incorporates a powerful microprocessor and a high capacity memory chip for storing and retaining data and transferring to a PC for inclusion in a spreadsheet or report. Tramex CRH Content and Humidity Meter is a vital tool for the flooring professional. Also available in kit form.

Tramex CME Hygrohood. The Hygrohood is a strong, robust surface humidity hood tester for concrete floors and floor screeds. It can be used in conjunction with the Tramex CME4 to corroborate the non-destructive moisture content test. Features Insulated humidity hood with built-in digital display which records minimum and maximum humidity levels. Optional C degrees/F degrees units available. Memory will be reset when the unit is switched off.

Tramex RWS Moisture Content Test Set for Roofing Professionals is a versatile handheld multi-mode moisture detection meter that provides non-destructive scanning and surveying, along with leak tracing on various roofing and wall types including EIFS (Exterior Insulation Finishing Systems). The Tramex RWS features 4 sensitivity ranges to a maximum depth of 4 inches, has a fine-tuning dial for instant and clear readings, and includes a telescopic handle for ease-of-use.

Tramex RHP Relative Humidity Probe for use with CRH, Original CMEXpert & MRH - Grey Cable. When this meter is plugged into the MRH, CMEXpert or CRH, it auto-changes to Hygrometer Mode. The probe can measure Humidity, Temperature, and Dew-point in concrete flooring, walls etc. Humidity readings are shown in both % Relative Humidity (%RH) and mixing ratio (grains/lb or grams/kg). (Mixing ratio not available on CRH meter).The solid-state capacitive sensor in the RH probe gives precise, quick results.

Tramex SMP Skipper Plus Moisture Content Tester for Wooden Boats is designed to non-invasively measure moisture content in GRP and wooden boats. The Skipper Plus is ideal for knowing if wooden boats are ready for painting or varnishing, tracing deck and bulkhead leaks, and can detect the presence of osmosis in GRP hulls. The Tramex SMP moisture meter features a “hold” function which facilitates ease of recording readings and a high moisture audio warning tone that can be switched on or off.