The AEMC 2620 High-Sensitivity AC Leakage Current Probe measures and detects current leakage shunted to the ground due to insulation faults. Permits the operator to anticipate failures and locate failures if they have occurred without the need to shut-down equipment.

The AEMC MN103 AC Current Probe for Leakage Current Testing is capable of measuring leakage current and low currents from 1mA in addition to measuring current on 5A secondaries. Enables AC current measuring to instruments with mV inputs.

The AEMC AN-1 Meter and Probe for Leakage Current Testing generates a temporary grounded artificial neutral to permit the measurement of fault currents on ungrounded three-phase systems. Performs a cyclic grounding technique which limits the possibility of insulation faults within the instrument, limits instrument overheating, and permits accuracy of actual fault currents. The relay closure time is adjustable to Fast (0.5 seconds) or Slow (2.3 seconds). An audible buzzer sounds whenever a neutral connection is grounded.

The AEMC 565 Clamp Meter for Leakage Current Testing is ideal for measuring low AC currents, which is the typical leakage current in ground conductors. Measures low currents via 60mA or 600mA range.