Main page content
Amprobe VPC-10 Voltage Probe Continuity Electrical Tester is a new generation electrical tester. The VPC-10 Voltage Probe and Continuity Tester features: Extremely easy to use, no buttons, no setups, Automatically turns ON and OFF, Automatically selects AC Voltage, DC Voltage or Continuity, Polarity Indication, etc.
AEMC 8220 MN93-BK Precision Power Quality Analyzer Kit is a single-phase, AC/DC power quality analyzer with a backlit digital display and a safety rating of 600V CAT III.
Kanomax 6710-05 TABmaster Spare Hood 3 x 3ft fo Kanomax 6710 TABmaster Capture Hood.
Specifications
SubSurface Instruments PL-2000 Advanced Underground Cable and Pipe Locator is designed with three active frequencies, two passive frequencies, four operation modes, and both direct connection and inductive capabilities. The SubSurface Instruments PL-2000 features four distinct modes of operation: Peak mode - for the most accurate locating and depth measurements. Null mode - for fast, easy tracking, and left/right indication. Distance mode - Longer distance tracking (up to 1.5 longer).
The Amprobe IR-720 Infrared Spot Thermometer features a 20:1 distance to target ratio with best in class accuracy and response time. Capable of measuring temperatures between -26 Degrees F to 1922 Degrees F or -32 Degrees C to 1050 Degrees C.
Shimpo DT-365 Portable Stroboscope Handheld is designed with high power LED lights that flash synchronously with rotating equipment to artificially show the process frozen or moving in slower motion.
Rugged and Accurate with State-of-the-Art Heated Diode Sensor.
Fieldpiece SRL8 Heated Diode HVAC Refrigerant Leak Detector uses a traditional heated diode detector with a sensor that detects all CFC's, HFC's, HCFC's, and blends. The Fieldpiece SRL8 is designed with a 0.1 oz/yr sensitivity with three adjustable sensitivity settings.
Key Features:
AEMC MN213 is a general purpose AC current probe, which is designed for DMMs and other measuring instruments with current input. It has a 1000:1 ratio and an output of 1mA per Amp in the primary (inside the jaw). The AEMC MN213 has integral 5 ft (1.5m) leads terminated by shrouded banana plugs.
The AEMC 6470-B Ground Resistance Meter measures soil resistivity, bonding, earth coupling, and grounding resistance. Measures from 0.01? to 99,000? with an auto-ranging feature to seek out the ideal measurement range test frequency and test current. Very simple to use: Connect the leads, press measure button, and read.
AEMC MN253 is a general purpose AC current probe with voltage output. It is designed for use with DMMs or with measuring instruments with voltage inputs. These probes permit the measurement or recording of current with instruments without current ranges. The voltage output is proportional to the current measured (through the jaws). The AEMC MN253 offers a voltage output of 10mV per amp measured.
The Amprobe AMC-4 Analog Megohmmeter Hand Cranked tests voltage via a hand crank which requires no batteries or external power.
AEMC 401 TRMS Digital Clamp Meter measures AC Current, AC/DC Voltage, Resistance, Continuity and Diode Test. The handheld AEMC 401 TRM Digital Clamp Meter has a safety rating of 1000V CAT IV with a 10,000 count blue backlit display.