Tempo 24B Irrigation Solenoid Tester is designed to to troubleshoot solenoids and trace and identify wiring.

Greenlee 521A Buried Wire and Irrigation Valve Locator is designed with an adjustable transmitter power and a sensitive locating receiver to allow location of buried wires and valves with swift accuracy.

BI Communications LanCaster Lan Cable Fault Locator is an advanced tester for convenient and fast on-site testing of data and voice network cables that identifies all common fault types and works with wiring schemes installed to TIA568 A/B, USOC and ISDN standards.

BI Communications TX2001 Handheld TDR Cable Fault Tester has been designed for professionals installing cables or doing troubleshooting of damaged wiring.  The TX2001 TDR cable fault tester shows graphs representing various cable faults such as opens, shorts, splices, taps or even water ingress into a cable.  The maximum distance measured by TX2001 TDR is 10,000 ft.

BI Communications TX2002 Handheld TDR Cable Fault Tester has been designed for professionals installing cables or doing troubleshooting of damaged wiring.  The TX2002 TDR is an upgrade from TX2001, so it still detects cable faults and shows them, as graphs of various cable faults such as opens, shorts, splices, taps or even water ingress into a cable.  The maximum distance measured by TX2002 TDR is longer 11,500 ft. or 3500m.  It also has a bigger screen that can be lit for easier reading of test results in dark conditions.

AEMC 1039 Kit 100V Megohmmeter includes: Model 1039 digital megohmmeter, field case, two color-coded leads, black test probe, remote test probe, MN211 AC current probe, batteries and user manual. The Remote Test Probe (with target light) is used for all measurements. The yellow button on the probe button is used the same way as the button on the instruments. The test voltage is generated when the button is pushed.

The AEMC 5060 5000V Megohmmeter Insulation Resistance Tester features presentation and calculation of Polarization Index (PI), Dielectric Discharge (DD), and Dielectric Absorption Ratio (DAR). Displays insulation resistance, test voltage, and the leakage current. At the conclusion of the test, capacitance of the sample and discharge voltage present at the leads is displayed. Operated by AC line power or rechargeable battery system. Designed with a high level of built-in safety features to ensure user safety.

AEMC 1210N 500V Analog Hand Cranked Megohmmeter is a compact, self-contained, hand-cranked True Megohmmeter. This practical and dependable instrument is designed for a broad range of plant and field service applications. The easy hand-cranked operation provides a steady, rectified DC voltage output across the entire range for consistently reliable readings. In addition, AEMC Analog Megohmmeter Model 1210N also permits resistance testing to 500kΩ and continuity testing to 100Ω.

AEMC 1250N 1000V Megohmmeter is a compact, self-contained, hand-cranked True Megohmmeter. This practical and dependable instrument is designed for a broad range of plant and field service applications. The easy hand-cranked operation provides a steady, rectified DC voltage output across the entire range for consistently reliable readings. AEMC Analog Megohmmeter Model 1250N has three test voltages for insulation resistance testing: 250, 500 and 1000V, and has a test voltage range for safety checks to confirm the sample is fully discharged and not connected to an energized circuit.

AEMC 1005 500V Analog Megohmmeter is a compact, self-contained, battery-operated megohmmeter. This practical, dependable and rugged insulation tester can be used for a broad range of plant and field service applications. AEMC insulation resistance tester model 1005 is the analog instrument with four easy-to-read scales. The megohm scale is an easy-to-read log scale graduated from 0.1 to 1000MΩ. The ohm scale is linear with a range from 0 to 10Ω.

The AEMC 1015 Analog 1000V Megohmmeter Resistance Tester is a portable, battery operated megohmmeter. This model offers insulation resistance testing at 1000V and 500V and resistance measurements up to 1000?. Displays measurements on an analog display with 4 different scales.

The AEMC 6470 4-Point Digital Ground Resistance Meter measures soil resistivity, bonding, earth coupling, and grounding resistance. Measures from 0.01? to 99,000? with an auto-ranging feature to seek out the ideal measurement range test frequency and test current. Very simple to use: Connect the leads, press measure button, and read. Data logs up to 512 measurements for future PC analysis and printing.