AEMC JM861 is designed for oscilloscopes, waveform displaying instruments and other instruments able to benefit from its frequency response. AEMC JM861 encompasses a special circuit and three ranges to maximize frequency response performance. Accurately measures AC current waveforms and has proportional mV output for direct readings on oscilloscopes. Three-position slide switch on the handle selects ranges.

AEMC JM813 is a high performance AC Current Probe with excellent transformation and low phase shift. The high quality magnetic core and uniform windings provide for accurate measurements up to 3600AAC. The "squared" jaw permits multiple conductor or bus bar positionings.

AEMC SR601 is a general purpose 1000AAC ac current probe designed for use with DMMs, loggers and other instruments that have a current input. It has a 1000:1 ratio and output of 1mA per amp measured in the jaw. The SR601 has jack output termination that accept 4mm banana plugs.

AEMC SR604 is a general purpose 1000AAC ac current probe designed for use with DMMs, loggers and other instruments that have a current input. It has a 1000:1 ratio and output of 1mA per amp measured in the jaw. The SR604 has an integral 5 ft (1.5m) lead terminated shrouded banana plugs.

AEMC SR651 is a general purpose 1000AAC current probe designed for use with DMMs, loggers and other instruments that have voltage inputs. It has a voltage output proportional to the rate of 1mV per amp to the current measured in the jaw. The AEMC SR651 AC Current Probe has jack output terminations that accept 4mm banana plugs.

AEMC SR652 AC Current Probe is a general purpose 1000AAC current probe designed for use with DMMs, loggers and other instruments that have voltage inputs. It has a voltage output proportional to the rate of 1mV per amp to the current measured in the jaw. The AEMC SR652 has an integral 5 ft (1.5m) lead terminated by shrouded banana plugs. The rounded jaw design on this probe makes it well-suited for power applications where high accuracy and low phase shift are important.

AEMC SR631 is a general purpose 1000AAC ac current probe designed for use with instruments that require a 5A current input. It has a 1000:5 ration and output of 5mA per amp measured in the jaw. The AEMC SR631 has jack output termination that accept 4mm banana plugs. The rounded jaw design on this probe makes it well-suited for power applications where high accuracy and low phase shift is important.

AEMC SR634 is a general purpose 1000AAC current probe designed for use with instruments that require a 5A current input. It works as a traditional current transformer (with ratios of 250:5, 500:5 or 1000:5) and has an output of 5mA per amp measured in the jaw. The AEMC SR634 AC Current Probe has jack output termination that accept 4mm banana plugs.

AEMC SR661 Oscilloscope BNC Terminated Probe is a range selectable probe that offers 3 switch selectable ranges of 20, 200 or 2000AAC. This probe has a voltage output proportional at the current measured in the jaw of the probe. The AEMC SR661 has an integral 6.5 ft (1.98m) lead terminated by BNC connector.

AEMC MN375 is a compact AC current probe. It is designed to meet the most stringent demands in industry and electrical contracting. The AEMC MN375 meets EN 61010, 600V Cat. III safety standards and is CE marked and UL approved. The AEMC MN375 has a 0.78" (20mm) jaw opening and will accommodate conductors up to 250MCM. The unique hooked jaw design facilitates clamping and hooking into conductors. Polycarbonate materials and ultrasonic welding are used throughout to ensure ruggedness and overall lasting reliability.

AEMC MN211 is a general purpose AC current probe, which is designed for DMMs and other measuring instruments with current input. It has a 1000:1 ratio and an output of 1mA per amp in the primary (inside the jaw). The AEMC MN211 has integral 5 ft (1.5m) leads terminated shrouded banana plugs.

AEMC MN250 is a general purpose AC current probe with voltage output. It is designed for use with DMMs or with measuring instruments with voltage inputs. These probes permit the measurement or recording of current with instruments without current ranges. The voltage output is proportional to the current measured (through the jaws). The AEMC MN250 offers a voltage output of 1mV per amp measured. The AEMC MN250 has jack outputs that accept 4mm banana plugs.