BI Communications TX2001 Handheld TDR Cable Fault Tester has been designed for professionals installing cables or doing troubleshooting of damaged wiring.  The TX2001 TDR cable fault tester shows graphs representing various cable faults such as opens, shorts, splices, taps or even water ingress into a cable.  The maximum distance measured by TX2001 TDR is 10,000 ft.

BI Communications LanCaster Lan Cable Fault Locator is an advanced tester for convenient and fast on-site testing of data and voice network cables that identifies all common fault types and works with wiring schemes installed to TIA568 A/B, USOC and ISDN standards.

Greenlee Tempo BLL-200 is a lightweight and ergonomically balanced buried line locator that traces 20 feet underground and provides depth readings up to 15 feet. The BLL-200 is UL and cUL listed and complies with UL 3111-1 Category III standards. The BLL-200 receiver has a switch setting that determines if the unit is in active (TRACE on the panel markings) or passive mode. In active mode, the receiver only looks for the signal from the transmitter, reducing the chance of tracing other lines carrying weaker signals. It locates multiple passive frequencies with only a single switch setting.

Tempo EML100 Marker-Mate Electronic Marker Locator is designed to locate all brands of buried, electronic markers, including the patented Tempo Omni Marker, and Uni Marker sets, an industry standard with the capability of detecting all seven application-based electronic marker types simultaneously (power, water, sanitary, telephone, gas, cable TV, non-potable water.) Tempo EML100 Marker-Mate is user-selectable for any of these marker types, or the Scan mode will locate the marker types simultaneously, and automatically determine which type has been detected.

Greenlee Tempo 501 Tracker II Pipe and Cable Locator is designed to trace the path and determine the depth of wires and metallic pipes on dead or active systems.

Greenlee 402R CATV Cable ID Tone Probe is designed to provide fast and accurate results for locating cables in the CATV industry.

Greenlee 620K Security Cable Tone and Trace Kit comes as a set of Greenlee PE620 Loop Tester and Greenlee 200EP Tone Probe.  The Greenlee PE620K is used by the alarm and security technicians, as it test closed and open loops of the alarm system.  The PE620K security wire test kit has been a standard tester used by the majority of security and alarm technicians in the last 20 years.

Features

Greenlee PE620 Tone Generator Security and Alarm Continuity Tester identifies security wires, as well as test security loop.  Greenlee PE620 sounds an audible signal to test normally-open or normally-closed security loop.  Security technicians can identify intermittent failures using latching mode.  Greenlee PE620 is a standard tone generator used by all security technicians and installers.

Features

Greenlee 77GX Multi-Tone Tone Generator sends a tone to identify a wire in a bundle.  Greenlee 77GX comes with a multiple tracing tones, line polarity check and auto battery off features.  The 77GX is a durable tone generator used by Network, Telecom, and Security technicians and installers.

Features

Greenlee 711K Tone Generator and Trace Probe Set is a redesigned classical tone and probe kit for tracing LAN, Telecom and CATV cables.  The Greenlee 711K can even trace single conductors.  Tone generator can send three different tone signals, so you can identify multple lines, and the inductive amplifier has a powerful speaker to aid work in a noisy environment.  Both tone generator and tone probe are protected by a nice and sturdy cordura carrying case.

Features