Main page content
UniSource DFG-9005 Generator for DDS Functions
DFG-9005
QVT-2012091071387354054
UniSource DFG-9005 DDS Function Generator uses an Advanced Direct Digital Synthesis (DDS) technique, allowing output in two independent channels.
Features
| Characteristics | UniSource DFG-9010 DDS Function Generator |
|
Advanced Direct Digital Synthesis(DDS)technique, output in two independent channels |
|
| Digital and indicator light display | |
|
Crystal oscillation reference, high frequency accuracy and high resolution |
|
| Keyboard operation, sequence adjusting with knob | |
| 100MHz frequency counter and power amplifier(optional) | |
|
Dimensions and weight: 10x4x13in (254x103x325mm) 2.2lbs (3kg) |
Specifications
| Specifications | UniSource DFG-9005 DDS Function Generator | ||
| Frequency Range | |||
| Channel A | Channel B | ||
| Sine | 40mHz ~ 5MHz | Sine | 10mHz ~ 1MHz |
| Others | 40mHz ~ 1MHz | Others | 10mHz ~ 50KHz |
| Technical Specifications | |||
| Channel A | Channel B | ||
| Waveform types | 16 types including sine,square,triangle, ramp and so on | Waveform Types | 1024 points |
| Waveform length | 1024 points | Waveform Length | 100 MSa/s |
| Sampling Rate | 100 MSa/s | Sampling Rate | 8 bits |
| Amplitude Resolution | 8 bits | Duty Cycle | 1% ~ 99% |
| Harmonic Distortion | ≥40dBc(<1MHz),≥35dBc(1MHz~10MHz), ≥30dBc(20MHz~40MHz) | Frequency Resolution | 10mHz |
| Total Distortion | ≤1%(20Hz ~ 200kHz) | Frequency Accuracy | ±(1×10-5 + 10mHz) |
| Rise / Fall Time | ≤35ns over pulse:≤ 10 % | Amplitude Range | 50mVpp~20Vpp ( high impedance) |
| Duty Cycle | 1% ~ 99% | Amplitude Resolution | 20mVpp |
| Frequency Resolution | 40mHz | Output Impedance | 50Ω |
| Frequency Accuracy | ±(5×10-5 + 40mHz) | Harmonic Wave | 0.1 ~ 250.0 times |
| Frequency Stability | ±5×10-6 / 3hrs | Frequency of Harmonic Wave | < 1MHz |
| Amplitude Range | 2mVpp~20Vpp (High impedance,for frequency ≤10MHz) 2mVpp~10Vpp (High impedance,for frequency >10MHz) | Phase difference of two CH's | 0 ~ 360° |
| Amplitude Resolution | 20mVpp(for amplitude > 2V) 2mVpp(for amplitude < 2V) | Resolution | 1° |
| Amplitude Accuracy | ±(1% + 2mV)(high impedance, virtual value,frequency is 1kHz) | Output Characteristics of TTL | |
| Amplitude Stability | ±0.5%/ 3hrs | Waveform Characteristics | Square,rise/fall time ≤20nS |
| Amplitude Flatness | ±5% (for frequency≤1MHz) ±10% (1MHz< for frequency ≤10MHz) ±20% (10MHz< for frequency ≤20MHz) | Frequency Characteristics | Same as the output of channel A |
| Output Impedance | 50Ω | Amplitude Characteristics | Compatibility of TTL,CMOS,low level < 0.3V ,high level > 4V |
| Offset Range | ±10V(high impedance) | General Characteristics | |
| Offset Resolution | 20mV | Power Conditions | Voltage: AC220(1±10%) V |
| Offset Accuracy | ±(1% + 20mV) With the functions of Sweeping and Frequency Modulation | Frequency | 50(1±5%)Hz |
| Options | Power | < 30VA | |
| Frequency Counter | Frequency measurement range:1Hz~100MHz Amplitude of input signal:100mVpp~20Vpp | Environment Conditions | Temperature: 0~40?; Humidity: 80% |
| Operation Characteristics | Keyboard operation, continuous adjusting by digit knobs | ||
| Power Amplifier | Maximum output power:7W(8Ω), 1W (50Ω) Maximum output voltage:22Vpp Frequency bandwidth:1Hz ~ 200kHz | Display Mode | Digit displays the working parameters. indicator light displays the function and option |
| Package Size | 254×103×325mm weight:3 kg | ||
| Manufacturing Technique | Surface conjoint technique, Large Scale Integrated circuit, high reliability, long life | ||
Proposition 65 Warning for California Residents: This product can expose you to chemicals including Benzene, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
