TIF Instruments TIFVA500A Digital HVAC Analyzer offers a range of features never before included in a single instrument. More than just an Anemometer, the VA500A measures all HVAC inlet and outlet variables, allowing an intelligent analysis of system performance. This one tool can replace up to four others, and eliminates the need for cumbersome flow hoods, psychrometers, etc. So easy to use, you will be performing complex measurements within minutes of unpacking the tool.

Extech 407114 Heavy Duty CFM Vane Anemometer features: Large vane for higher airflow ranges; Display Air Flow (CFM/CMM) or Air Velocity plus Temperature simultaneously; 20 point averaging for airflow; Built-in RS-232 PC Interface, etc.

Photonix PX-D401 Datarecording Meter and 1300 LED Source Premium Grade Fiber Optic Test Kit are intended to allow technicians to perform precise optical measurements in the field. The meters, when operated in absolute power mode, are used to determine the level of optical power being emitted from a transmitter. In relative mode, the meters are used to perform fiber loss measurements or splice tuning operations. The PX-B240 will also store up to 999 readings per wavelength for later upload to a PC for later printiny and analysis. TECHLITE meters and sources were designed to be rugged.

JDSU LB110 Phone Test Set Lil Buttie is the hands free butt set with headset. At half the size and half the weight the Lil Buttie sets a new standard in field butt sets. Formerly Test-Um LB110.

Photonix PX-D201 LANLITE 1300 ST Style LED Fiber Optic Test Kit was designed to provide the test technician with an inexpensive, accurate, and easy to use instrument kit for making power and loss measurements in the fiberoptic LAN environment.The Photonix PX-D201LANLITE optical test sets consist of a LANLITE series power meter, light source, instruction manual, batteries, and waterproof carry case. The LANLITE Photonix PX-D201 meter is used to measure power levels in an optical fiber.

Photonix PX-D604 Leak Detection Kit with 1550nM Source and Ge Probe was designed to locate energy leaks in fiberoptic systems due to splice loss, connector loss, breakage, or bending. By simply sweeping over a fiber, the leak detection probe will beep whenever it encounters a light loss point. Generally performing the same function as a visible laser source, this product is primarily used in OTDR dead zone areas or splice enclosures where exact pinpointing of a fault is critical.

Photonix PX-C202FC TECHLITE fiber optic LED light sources provide high stability and features: 850/1300 nm double wavelength, power output –17dBm into 62.5; 30, 500Hz and 2kHz modulation; temperature stabilized output, overfilling LED design; rugged aluminum body; SC style port.

Features

Extech TK34 Electrical HVAC DMM Kit features: TK34 Kit (General Purpose Electrical/HVAC DMM Test Kit) offers uncompromising performance at an unbeatable price.

Photonix PX-C201SC TECHLITE Fiber Optic LED Light Source, when used with a power meter, allow technicians to perform precise optical loss measurements in the field. The sources provide the stable light output required by optical power meters to determine power loss in fiber, connectors, attenuators, or other passive optical components.

Photonix PX-C200SC TECHLITE Fiber Optic LED Light Source, when used with a power meter, allow technicians to perform precise optical loss measurements in the field. The sources provide the stable light output required by optical power meters to determine power loss in fiber, connectors, attenuators, or other passive optical components.

Photonix PX-C102SC LANlite Fiber Optic LED Light Source was designed to provide the test technician with an inexpensive, accurate, and easy to use infrared light reference for use in making optical loss measurements in the LAN environment. Although designed complement the LANLITE optical power meters, these sources will work well with any power meter in multimode testing applications.

Photonix PX-C101SC LANlite fiber optic LED light sources provide high stability and features: ultra low cost; 1300nm operation; bandwidth 170nm; power output 20dBm into 62.5; core overfilling design; temperature stabilized; easy change 9v battery; low battery indication; rugged aluminum body; SC style port. Although designed complement the LANLITE optical power meters, these sources will work well with any power meter in multimode testing applications.