Extech MO300 Moisture Meter Pin-Free features: Non-Invasive moisture content of building materials and wood; Quickly indicates the moisture content of materials; Moisture index display corresponds to % moisture of wood or material being tested; Measurement depth to 1.25 (32mm) below the surface, etc. Discontinued product.

JDSU TP100 Tell-All Cable Tester Indicator is designed to aid network technicians and MIS personnel in the identification of the equipment connected to modular jacks found throughout the workplace.

Carbon Dioxide CO2 Analyzer model TIF8600 with 100V to 240V, 50/60Hz.

Extech 160310 Electronic Counting Scale 12lbs features: Economically and accurately count and weigh components, resistors and other parts; Capacity of 12lbs; Simple to use for precise weighing and counting of small parts to 0.02% accuracy; Large green, easy to read LED display of: Piece Count (6 digits), Piece weight (5 digits), Count weight (5 digits); TARE and Auto ZERO functions; Memory function stores count and weight values. Discontinued product.

Promax MINIMAX-KT Refrigerant Recovery Machine with 80% Tank Shut Off Kit installed.

The AEMC 4630-150 4-Point Digital Ground Resistance Meter Kit measures soil resistivity and ground resistance. Measures from 0? to 2000? with an auto-ranging feature to automatically seek out the optimum measurement range. Resists vibration, shock, and drops up to par with IEC standards. Denies high levels of interference to ensure accurate measurements.

Greenlee AT8LK LAN Cable Tone and Trace Set identifies individual wires of Telecom, LAN, Security and Alarm, as well as CATV cables.  Tempo AT8LK is an excellent tool for either installation or maintenace jobs.  In addition, this lan cable tracing kit provides identification of hubs or switch ports through a light blinking feature.  The AT8LK tone and probe has two tone outputs, battery life indication light, auto shutt off, as well as tests contiuity and polarity of cables.  It was designed originally by Progressive Electronics, the inventors of the most popular tone and p

Greenlee 711K Tone Generator and Trace Probe Set is a redesigned classical tone and probe kit for tracing LAN, Telecom and CATV cables.  The Greenlee 711K can even trace single conductors.  Tone generator can send three different tone signals, so you can identify multple lines, and the inductive amplifier has a powerful speaker to aid work in a noisy environment.  Both tone generator and tone probe are protected by a nice and sturdy cordura carrying case.

Features

Extech 407850 universal digital vibration meter features: Measure Velocity and Acceleration plus built-in PC interface; Selectable units of in/s or mm/s for Velocity and ft/s2 or m/s2 for Acceleration; Velocity range of 7.87in/s or 200mm/s; Acceleration range of 656ft/s2 or 200m/s2; Wide frequency range of 10Hz to 1kHz; Max/Min record values for later recall; RMS or Peak Value measurement modes.

Greenlee 402R CATV Cable ID Tone Probe is designed to provide fast and accurate results for locating cables in the CATV industry.

Tempo 24B Irrigation Solenoid Tester is designed to to troubleshoot solenoids and trace and identify wiring.

BI Communications TX2001 Handheld TDR Cable Fault Tester has been designed for professionals installing cables or doing troubleshooting of damaged wiring.  The TX2001 TDR cable fault tester shows graphs representing various cable faults such as opens, shorts, splices, taps or even water ingress into a cable.  The maximum distance measured by TX2001 TDR is 10,000 ft.