Psiber CTK1015 CableTracker Signal Generator and Trace Probe Set is a great tool to find a wire in a bundle, trace LAN or telecom cables, or even identify hub or switch port.  The Psiber CTK1015 CableTracker is a classical tone and probe test set used primarily by network and LAN technicians and installers.  One can find opens and shorts in a circuit, trace wires or pairs from it's origin to the hub, as well as identify hub and switch ports by invoking blinking of the hub port light.  The CTK1015 is equipped with a plastic non-conductive tip to prevent creating short circuits, a

JDSU KP106 Tone and Probe Field Kit contains a High Sensitivity Tone-Cable Tracer with a round tip and a paddle style tip, a Latch-Test with molded cord set with alligator clips, a 7.5" cable assembly with 2 no-fault RJ12 connectors in a Cordura pouch. Tone and probe kit at economic price. Formerly Test-Um model KP106.

JDSU LB110 Phone Test Set Lil Buttie is the hands free butt set with headset. At half the size and half the weight the Lil Buttie sets a new standard in field butt sets. Formerly Test-Um LB110.

Photonix PX-D102 Highly Accurate Power Meter and 850-1300 LED Light Source Fiber Optic Test Kit are intended to allow technicians to perform precise optical measurements in the field. The meters, when operated in absolute power mode, are used to determine the level of optical power being emitted from a transmitter. In relative mode, the meters are used with the included source to perform fiber loss measurements or splice tuning operations. The TECHLITE meters and sources were designed to be rugged.

Photonix PX-D103 Highly Accurate Power Meter and 1310 Laser Light Source Fiber Optic Test Kit are intended to allow technicians to perform precise optical measurements in the field. The meters, when operated in absolute power mode, are used to determine the level of optical power being emitted from a transmitter. In relative mode, the meters are used with the included source to perform fiber loss measurements or splice tuning operations. TECHLITE meters and sources were designed to be rugged.

Photonix PX-D401 Datarecording Meter and 1300 LED Source Premium Grade Fiber Optic Test Kit are intended to allow technicians to perform precise optical measurements in the field. The meters, when operated in absolute power mode, are used to determine the level of optical power being emitted from a transmitter. In relative mode, the meters are used to perform fiber loss measurements or splice tuning operations. The PX-B240 will also store up to 999 readings per wavelength for later upload to a PC for later printiny and analysis. TECHLITE meters and sources were designed to be rugged.

JDSU LB220 Lil Buttie Pro Phone Test Set Phone Line Tester comes with LCD readout and voltmeter.

JDSU LB230 Lil Buttie Pro Phone Butt Set comes with headset bed of nails cord set and snap clip and with LCD readout and volt meter. Formerly Test-Um LB230.

Extech 407113 Heavy Duty CFM Metal Vane Anemometer features: Withstands temperatures to 175°F (80°C) and airspeed to 7880ft/min; Display Air Flow (CFM) or Air Velocity plus Temperature; Air Flow displayed in 3 modes: - Instantaneous value - Up to 20 point average or - 2/3 flow value; Built-in RS-232 PC Interface, etc.

Features

Extech CO52 Flammable Gas Leak Detector features: Detects all combustible gases as low as 50ppm with easy one key operation; LCD display with nominal 100, 1000 and 10,000ppm indicators; Audible beeper increases pitch tone as the concentration of gases go up; Auto zero on start up; 5 second response time.

Extech 407114 Heavy Duty CFM Vane Anemometer features: Large vane for higher airflow ranges; Display Air Flow (CFM/CMM) or Air Velocity plus Temperature simultaneously; 20 point averaging for airflow; Built-in RS-232 PC Interface, etc.

Extech 407117 Heavy Duty CFM Mini-Metal Vane Anemometer features: Telescoping probe easily fits into high temperature ducts; Display Air Flow (CFM/CMM) or Air Velocity plus Temperature; 20 point averaging for airflow; Telescoping 0.5" (13mm)D metal mini-vane sensor extends up to 1.9ft (59cm) long; MIN/MAX readings; Data hold and Auto power off; Built-in RS-232 PC Interface.