The Amprobe AMC-4 Analog Megohmmeter Hand Cranked tests voltage via a hand crank which requires no batteries or external power.

Amprobe UT-300 Ultrasonic Transmitter Accessory is a ultrasonic transmitter that enhances the locating ability of the Amprobe ULD-300 Ultrasonic Leak Detector.

Specifications

AEMC SR600 is a general purpose 1000AAC ac current probe designed for use with DMMs, loggers and other instruments that have a current input. It has a 1000:1 ratio and output of 1mA per amp measured in the jaw. The AEMC Instruments SR600 has jack output termination that accept 4mm banana plugs.

AEMC MN253 is a general purpose AC current probe with voltage output. It is designed for use with DMMs or with measuring instruments with voltage inputs. These probes permit the measurement or recording of current with instruments without current ranges. The voltage output is proportional to the current measured (through the jaws). The AEMC MN253 offers a voltage output of 10mV per amp measured.

AEMC MN313 is a high accuracy and lower phase shift AC current probe. It has a 1000:1 ratio and an output of 1mA per amp in the primary (inside the jaws). The AEMC MN313 has an integral 5 ft (1.5m) lead terminated by shrouded banana plugs.

The AEMC 6501 500V Megohmmeter Hand-Cranked Resistance Tester is excellent for testing and preventative maintenance of motors, wiring, cables, and switchgear. The hand-crank operation provides a stable DC voltage output for reliable readings. The unit also allows resistance testing to 500k? and tests continuity to 100?.

The AEMC 6527 5000V Megohmmeter Insulation Resistance Tester is a portable mega ohmmeter capable of measuring insulation resistance from 1k? to 4000M?. Includes three user selectable test voltages of 1000V, 500V, and 250V. Also features a AC/DC voltmeter function capable of measuring up to 600VAC and 1000VDC, continuity test with audible alert for resistances under 35?, and an overload protection of 600Vrms. Can measure up to 400k?.

The AEMC 6470-B Ground Resistance Meter measures soil resistivity, bonding, earth coupling, and grounding resistance. Measures from 0.01? to 99,000? with an auto-ranging feature to seek out the ideal measurement range test frequency and test current. Very simple to use: Connect the leads, press measure button, and read.

AEMC 670 Full-Function Digital Clamp Meter offers a comprehensive set of measurement ranges including AC Amps, AC Volts, DC Volts, Ohms, and Continuity (with audible alert), Frequency (from V or A) and Temperature. The AEMC 670 Full-Function Digital Clamp Meter adheres to international safety and quality standards to ensure a measuring tool that is professional and reliable.

AEMC 675 Full-Function Digital Clamp Meter offers a comprehensive set of measurement ranges including AC Amps, AC Volts, DC Volts, Ohms, and Continuity (with audible alert), Frequency (from V or A) and Temperature. The AEMC 675 Full-Function Digital Clamp Meter adheres to ineternational safety and quality standards to ensure a measuring tool that is professional and reliable.

AEMC MN213 is a general purpose AC current probe, which is designed for DMMs and other measuring instruments with current input. It has a 1000:1 ratio and an output of 1mA per Amp in the primary (inside the jaw). The AEMC MN213 has integral 5 ft (1.5m) leads terminated by shrouded banana plugs.

AEMC MN251 is a general purpose AC current probe with voltage output. It is designed for use with DMMs or with measuring instruments with voltage inputs. These probes permit the measurement or recording of current with instruments without current ranges. The voltage output is proportional to the current measured (through the jaws).