Protek B803 Sweep Waveform Function Generator 0.02Hz to 2MHz features: Seven frequency ranges with 100:1 control on each; range; Built-in 2MHz, 4 digit frequency counter; Less than 2% sine-wave distortion; Variable symmetry; DC offset and Voltage Controlled Frequency input; TTL sync output. Product Discontinued.

This modern RF signal strength meter and spectrum analyzer or rf tester features: 10MHz to 2.6GHz frequency range; Advanced DSP design converts any 20MHz or greater dual trace oscilloscope to a 2.6GHz spectrum analyzer; Resolution Bandwidths to 3KHz and zero span; LCD reads out Frequency and Amplitude; Over 75dB of display range; Internal Calibration Range; On screen markers; Ideal for testing AM, FM, CB, Cellular, Marine, Aircraft and Cable TV equipment. Made by Protek, a quality manufacturer of RF test equipment. Product Discontinued.

Amprobe ACDC-400 Digital Clamp-on Multimeter comes equipped with: AC/DC Current up to 400A, AC/DC Voltage up to 600V, Resistance measurement, Continuity test, etc.

Amprobe ACD-14 TRMS FX Digital Clamp-on Multimeter comes equipped with: Dual Display, Measures micro amps, Temperature (Type-K Thermocouple), Capacitance to 3000µF, Average Sensing, Measures AC Voltage, Measures DC Voltage, Measures AC Current, etc. For most applications, the TRMS version of the meter is recommended in order to avoid large measuring errors. If uncertain, always choose TRMS sensing clamp to assure measuring accuracy for all your applications.

Amprobe ACDC-620T Digital AC-DC Clamp-on Multimeter comes equipped with: TRMS Measurement, Measures AC Voltage 1000V, Measures DC Voltage 1000V, Measures AC Current to 1000A, etc.

Amprobe AT-2001 Advanced Wire Tracer locates circuits of energized wires buried or hidden behind walls up to 13 feet deep. Amprobe AT-2001 is a wire tracer and performs tests without having to interrupt power. Locates electrical breakers, neutral and ground lines, etc. Amprobe AT-2001 cable locator functions as circuit breaker finder and electrical wire tracer. Kit contains: R-2000 Receiver,S-2300 Transmitter 9-300V, C2901 Cordset 110 Volt Plug to Banana Plugs

Protek 6030R - Programmable Power Supply 0-60V at 0-3A features: Remote Sensing for precise regulation; Remote analog programming for both Constant Voltage and Constant Current modes; Output load may be turned on or off by remote control; Series & Parallel Master/Slave and Tracking operation; Excellent Load, Line Regulation and Ripple Specs; etc. Product Discontinued.

Amprobe ACD-51HP power quality clamp-on meter comes equipped with: AC Current up to 400A, AC/DC Voltage up to 600V, Active, Reactive and Apparent Power Single/Three Phase, Power Factor, Cos, Single/Three Phase/Energy, Frequency (with test leads and jaw, etc.

Amprobe ACD-10 TRMS Pro Digital Clamp-on Multimeter is an excellent clamp-on meter and electrical tester that comes equipped with: TRMS Measurement, Measures AC Voltage, Measures DC Voltage, Measures AC Current to 400A, In Rush Current Measurement, etc. For most applications, the TRMS version of the meter is recommended in order to avoid large measuring errors. If uncertain, always choose TRMS sensing clamp to assure measuring accuracy for all your applications. Discontinued product replaced by Amprobe ACD-10 TRMS Plus.

Protek B821 Sweep Function Generator - waveform generator features: Sweep Function Generator and Frequency Counter; Sine, Square, Triangle, Ramp, Pulse, Skewed Sine and TTL Square Waveforms; 0.2Hz to 20MHz Frequency Output (Sine wave); Built-in 8 digit 3.0GHz Frequency Counter; Internal and External linear Sweep control; Variable Symmetry for generating Sawtooth (Ramp), Skewed Sine and Pulse Waveforms; Variable DC Offset control; Variable Output level control and 20 dB attenuator. Product Discontinued.