Extech 407114 Heavy Duty CFM Vane Anemometer features: Large vane for higher airflow ranges; Display Air Flow (CFM/CMM) or Air Velocity plus Temperature simultaneously; 20 point averaging for airflow; Built-in RS-232 PC Interface, etc.

Photonix PX-D103 Highly Accurate Power Meter and 1310 Laser Light Source Fiber Optic Test Kit are intended to allow technicians to perform precise optical measurements in the field. The meters, when operated in absolute power mode, are used to determine the level of optical power being emitted from a transmitter. In relative mode, the meters are used with the included source to perform fiber loss measurements or splice tuning operations. TECHLITE meters and sources were designed to be rugged.

Photonix PX-D605 Leak Detection Kit with 1310-1550nm Source and Ge Probe was designed to locate energy leaks in fiberoptic systems due to splice loss, connector loss, breakage, or bending. By simply sweeping over a fiber, the leak detection probe will beep whenever it encounters a light loss point. Generally performing the same function as a visible laser source, this product is primarily used in OTDR dead zone areas or splice enclosures where exact pinpointing of a fault is critical.

TIF Instruments TIFVA500A Digital HVAC Analyzer offers a range of features never before included in a single instrument. More than just an Anemometer, the VA500A measures all HVAC inlet and outlet variables, allowing an intelligent analysis of system performance. This one tool can replace up to four others, and eliminates the need for cumbersome flow hoods, psychrometers, etc. So easy to use, you will be performing complex measurements within minutes of unpacking the tool.

Extech MO200 Moisture Meter and Tester features: Dual Measurement Scale LCD Display with Bargraph; Measures Wood Moisture from 6 to 44%; Measures Building Material Moisture from 0.2 to 2.0%; Use on wall board, sheet rock, cardboard, plaster, concrete, and mortar.

Extech MO300 Moisture Meter Pin-Free features: Non-Invasive moisture content of building materials and wood; Quickly indicates the moisture content of materials; Moisture index display corresponds to % moisture of wood or material being tested; Measurement depth to 1.25 (32mm) below the surface, etc. Discontinued product.

Extech 407119 Heavy Duty CFM Hot Wire Anemometer features: Accurately measures Air Flow (CFM/CMM) or Air velocity plus °F/°C Temperature; Air velocity measurements as low as 40ft/min; Telescoping probe is ideal for use in ducts and ventilating systems; extends up to 4ft (1.22m) long; Built-in RS-232 PC Interface, etc.

Features

Extech RH350 Super Heat Digital Psychrometer features: Superheat differential measurements: T1-T2, Air-T1, T1-Dewpoint; Dual Type K external temperature probe input; Simultaneous display of %RH, Temperature and Dew point or Wet Bulb or External Probe Temperatures; Built-in RS-232 interface, etc.

Features

TIF Instruments TIF8800 Combustible Gas Detector is MSHA approved and UL Classified. The unique flexible 15" stainless probe allows you to access hard to reach places. All feature automatic warm-up and are ideal for a tremendous range of uses and are invaluable for safety in many applications.

Photonix PX-D604 Leak Detection Kit with 1550nM Source and Ge Probe was designed to locate energy leaks in fiberoptic systems due to splice loss, connector loss, breakage, or bending. By simply sweeping over a fiber, the leak detection probe will beep whenever it encounters a light loss point. Generally performing the same function as a visible laser source, this product is primarily used in OTDR dead zone areas or splice enclosures where exact pinpointing of a fault is critical.

AEMC 3945-B MR193 Precision Power Quality Analyzer Kit provides True RMS single, two- and three-phase measurements at 256 samples per cycle, including DC; Color waveforms in real-time, simple on-screen setup, measures True RMS voltage and current. AEMC 3945-B 193-36 Precision Power Quality Analyzer Kit works with single and three phase systems (Y and Delta) and provides measurements of voltage anomalies, power system harmonics and power factor.

Amprobe THWD-2 Digital Sling Psychrometer features: Perfect for checking ambient air conditions in an HVAC environment; Temperature readings; Relative Humidity measurement; Dew Point and Wet Bulb readings; MAX/MIN with Time Stamp, etc.