The Greenlee 508S Mini Wire Finder and Cable Locator traces wires up to 3 feet in depth, underground or in walls, up to 1000 feet. Also capable of determining the approximate depth of cable or wire underground.

Tempo 24BK Irrigation Solenoid Chatterbox Test Kit includes the 24B Station Master Pro and the 200EP Tone Probe designed for any irrigation system troubleshooting. The Tempo 24BK features intuitive LEDs, solenoid activation mode, and chatter mode to rapidly open and close solenoids to help alert the user where it is located.

BI Communications LanCaster Lan Cable Fault Locator is an advanced tester for convenient and fast on-site testing of data and voice network cables that identifies all common fault types and works with wiring schemes installed to TIA568 A/B, USOC and ISDN standards.

Greenlee 77GX Multi-Tone Tone Generator sends a tone to identify a wire in a bundle.  Greenlee 77GX comes with a multiple tracing tones, line polarity check and auto battery off features.  The 77GX is a durable tone generator used by Network, Telecom, and Security technicians and installers.

Features

The AEMC 5060 5000V Megohmmeter Insulation Resistance Tester features presentation and calculation of Polarization Index (PI), Dielectric Discharge (DD), and Dielectric Absorption Ratio (DAR). Displays insulation resistance, test voltage, and the leakage current. At the conclusion of the test, capacitance of the sample and discharge voltage present at the leads is displayed. Operated by AC line power or rechargeable battery system. Designed with a high level of built-in safety features to ensure user safety.

AEMC 4610-150 4-Point Ground Earth Resistance Tester is available alone or as a complete kit 4610-150. The kit includes the meter to measure earth resistance, two 150 ft color-coded leads on spools (red and blue), one 30 ft lead (green), two 14.5" T-shaped auxiliary ground electrodes, one set of five spaded lugs, 100 ft tape measurer and carrying bag.

AEMC 275HVD Contactless High Voltage Detector detects high voltage without direct physical contact.

BI Communications TX2002 Handheld TDR Cable Fault Tester has been designed for professionals installing cables or doing troubleshooting of damaged wiring.  The TX2002 TDR is an upgrade from TX2001, so it still detects cable faults and shows them, as graphs of various cable faults such as opens, shorts, splices, taps or even water ingress into a cable.  The maximum distance measured by TX2002 TDR is longer 11,500 ft. or 3500m.  It also has a bigger screen that can be lit for easier reading of test results in dark conditions.

AEMC 3945-B SR193 Precision Power Quality Analyzer Kit provides True RMS single, two- and three-phase measurements at 256 samples per cycle, including DC; Color waveforms in real-time, simple on-screen setup, measures True RMS voltage and current. AEMC 3945-B 193-36 Precision Power Quality Analyzer Kit works with single and three phase systems (Y and Delta) and provides measurements of voltage anomalies, power system harmonics and power factor.

Insertion Loss and Link Loss Testing: Paired with a TEMPO 555B or 558B optical power meter, the 265A serves as an ideal general purpose 1310nm laser source for measuring the insertion loss of single-mode fiber optic cables and connectors. The 265A can also be used with an optical power meter for dual wavelength link loss testing of installed cable plants. The 265A laser source is particularly useful for testing and maintaining telecommunications systems and other long wavelength single-mode fiber optic networks operating at 1310nm.

AEMC MN114 AC Current Probe Leakage Current Tester is a general purpose mini probe which offers 1mA to 10AAC, continuous cycle current range. The output signal is 100mVAC/AAC (1V at 10A). It was designed to optimize measurements on 5A signals. The output termination is a 5ft lead with safety 4mm banana plug.

Amprobe DM-III Multitest Power Quality Data Logger and Analyzer is a complete kit. Amprobe DM-III Multitest Power Quality Data Logger and Analyzer is a portable power quality meter, monitor and recorder that works with single and three phase systems (Y and Delta) and will measure voltage anomalies including sags and surges, power system harmonics and power factor. Megohmmeter functions: Selectable test voltages up to 1000V.