Extech FG100 Handheld Combustible Gas Leak Detector is designed to detect combustible gases quickly and accurately.

JDSU TP600 LanRoamer PRO Cable Tester Analyzer is the high performance length measurement CAT 5 tester that identifies multiple faults clearly without interpretation, has one-ended testing with pre-test for fast result, clear wiremapping form displayed on 2-line, 16 character LCD display and measures cable length. Formerly Test-Um model TP600.

Extech M3000AS AC Programmable Indicator features: 1/8 DIN Temperature, Voltage, and 4-20mA models; 1999 count 0.56" (14mm) LED; Multiple inputs/scaleable display for Current and Voltage models; Wide range display scaling via easily accessible pot adjustments behind snap off faceplate; Fits in 1/8 DIN panel. Discontinued product.

Extech 407820 Digital Torque Meter Heavy Duty features: Measure torque in units of lb-in., kg-cm or Newton-cm, includes a PC interface; Torque ranges of 12.99 lb-in., 15.00 kg-cm and 147.1 Newton-cm using remote sensor and chuck assembly; Min/Max and Peak mode; Push button High or Low resolution selection; Selectable Fast/Slow sampling time; Data Hold and Auto Power off; Built-in RS-232 PC serial interface

JDSU TP100 Tell-All Cable Tester Indicator is designed to aid network technicians and MIS personnel in the identification of the equipment connected to modular jacks found throughout the workplace.

Tempo 77HP Tone Generator permits technicians to identify the conductor within a bundle, at a cross-connect point or at the remote end. Can be used on twisted-pair wiring (telecom, datacom, etc.), single conductors, coaxial cables, de-energized AC wiring and most other wiring. Note: formerly sold as Progressive Electronics. Tempo 77HP Tone Generator has been replaced by Tempo 77HP-G Tone Generator .

Greenlee 801K Signal Generator and Trace Tone Set for tracing and identifying cables.  Greenlee 801K is one of the best tone and probe kits on the market.  This classic tone and trace kit comes with a filter probe, one that eliminated electric or AC hum (noise).  This special feature enables technicians to identify cables or wire that are close to electrical lines or electronic equipment, when regular tone and probe kit does not produce clear signal.  Greenlee 801K has been a standard tone and probe set at all telecom companies for many years.

Feat

Greenlee PE620 Tone Generator Security and Alarm Continuity Tester identifies security wires, as well as test security loop.  Greenlee PE620 sounds an audible signal to test normally-open or normally-closed security loop.  Security technicians can identify intermittent failures using latching mode.  Greenlee PE620 is a standard tone generator used by all security technicians and installers.

Features

The AEMC 4620-150 4-Point Digital Ground Resistance Meter Kit measures soil resistivity and ground resistance. Measures from 0? to 2000? with an auto-ranging feature to automatically seek out the optimum measurement range. Resists vibration, shock, and drops up to par with IEC standards. Denies high levels of interference to ensure accurate measurements.

Greenlee Tempo 501 Tracker II Pipe and Cable Locator is designed to trace the path and determine the depth of wires and metallic pipes on dead or active systems.

BI Communications LanCaster Lan Cable Fault Locator is an advanced tester for convenient and fast on-site testing of data and voice network cables that identifies all common fault types and works with wiring schemes installed to TIA568 A/B, USOC and ISDN standards.

AEMC 1039 Kit 100V Megohmmeter includes: Model 1039 digital megohmmeter, field case, two color-coded leads, black test probe, remote test probe, MN211 AC current probe, batteries and user manual. The Remote Test Probe (with target light) is used for all measurements. The yellow button on the probe button is used the same way as the button on the instruments. The test voltage is generated when the button is pushed.