Main page content
AEMC 3945-B Precision Power Quality Analyzer provides True RMS single, two- and three-phase measurements at 256 samples per cycle, including DC; Color waveforms in real-time, simple on-screen setup, measures True RMS voltage and current. AEMC 3945-B 193-36 Precision Power Quality Analyzer Kit works with single and three phase systems (Y and Delta) and provides measurements of voltage anomalies, power system harmonics and power factor.
Bacharach 19-8117 Monoxor Plus Professional CO Analyzer samples CO gas in real time with a resolution of 1ppm and range of 0-2000ppm, with an included hose and stainless steel probe for measuring readings inside a flue. The Bacharach 0019-8117 Carbon Monoxide Analyzer displays readings in a real-time graph that can be switched to a numerical data view, and can store up to 10 readings.
The AEMC 6527 5000V Megohmmeter Insulation Resistance Tester is a portable mega ohmmeter capable of measuring insulation resistance from 1k? to 4000M?. Includes three user selectable test voltages of 1000V, 500V, and 250V. Also features a AC/DC voltmeter function capable of measuring up to 600VAC and 1000VDC, continuity test with audible alert for resistances under 35?, and an overload protection of 600Vrms. Can measure up to 400k?.
AEMC MN253 is a general purpose AC current probe with voltage output. It is designed for use with DMMs or with measuring instruments with voltage inputs. These probes permit the measurement or recording of current with instruments without current ranges. The voltage output is proportional to the current measured (through the jaws). The AEMC MN253 offers a voltage output of 10mV per amp measured.
AEMC SL206 SL200 Series AC/DC Current Probe measures low DC or AC from 10mA to 80A. The probe jaws clamp around the conductor under test, allowing current measurements without breaking the circuit. Hall sensor technology senses the magnetic field produced by the current measured, and generates a millivolt DC or AC output signal.
Shimpo Instruments ST-5000 Dual Stroboscope and Tachometer has a variety of useful utilities for measuring rotational processes, including traditional stroboscope lighting that flashes synchronously with a device to give the illusion of frozen or slowed images.
The UEi DMEG3 Portable Insulation Resistance Tester enables the user to prevent, identify, and predict insulation failures that can create power problems, appliance failure, stop production, or put lives in danger.
Fieldpiece SSX34 HVAC Superheat Subcool Meter calculates superheat and subcool values for an AC system by measuring line pressure and temperature. The Fieldpiece SSX34 can be used with a "T" fitting between the refrigerant bottle and the system allowing real-time readings during charging.
Shimpo Instruments DT-725 Digital Stroboscope is constructed of strengthened high impact plastic, are exceptionally reliable and withstand harsh conditions. Shimpo DT-725 Digital Stroboscope features phase shift which enables the observer to focus on one particular area of rotating and/or reciprocating machinery.
AEMC MN213 is a general purpose AC current probe, which is designed for DMMs and other measuring instruments with current input. It has a 1000:1 ratio and an output of 1mA per Amp in the primary (inside the jaw). The AEMC MN213 has integral 5 ft (1.5m) leads terminated by shrouded banana plugs.
AEMC MN251 is a general purpose AC current probe with voltage output. It is designed for use with DMMs or with measuring instruments with voltage inputs. These probes permit the measurement or recording of current with instruments without current ranges. The voltage output is proportional to the current measured (through the jaws).