| Datasheet: |
 |
| UniSource FG-8102 2MHz Sweep Function Generator Description: |
 UniSource FG-8102 2MHz Sweep Function Generator is a 4-in-1 sweep, function and pulse generator and frequency counter. This sweep function generator provides versatile waveforms for sine, square, triangle, ramp, pulse, sawtooth and
DC outputs.
 |
| UniSource FG-8102 2MHz Sweep Function Generator Characteristics: |
| |
 4-in-1 Sweep, Function & Pulse Generator and Frequency Counter
 |
| |
 Versatile waveforms for Sine, Square, Triangle, Ramp, Pulse, Sawtooth and DC outputs
 |
| |
 0.02 Hz to 2 MHz Frequency Output in 7 Ranges
 |
| |
 Built in 6 digit Internal and External Counter Display- Up to 50MHz
 |
| |
 Internal and External linear Sweep control from 1:1 to 100:1
 |
| |
 Variable Symmetry for generating Sawtooth and Pulse waveforms
 |
| |
 TTL and CMOS leveled Square waveform output
 |
| |
 Variable DC Offset control
 |
| |
 Variable Output level control with 20 dB Attenuator and Amplitude control
 |
| Includes: |
 Power Cord, BNC Cable, Fuse, Instruction Manual
 |
| UniSource FG-8102 2MHz Sweep Function Generator Specifications: |
| Output Characteristic: |

 |
| Waveforms |
 Sine, Square, Triangle, Ramp, Pulse, Sawtooth, TTL/CMOS Leveled Square, DC
 |
| Frequency Range |
 0.02Hz to 2MHz in 7 Ranges- 1,10,100,1K,10K,100K,1M
 |
| Frequency Accuracy |
 Plus/minus 5 percent of full scale
 |
| Output Level |
 20Vp-p in open circuit, 10Vp-p into 50 Omega Load
 |
| Output Impedance |
 50 Omega plus/minus 5 perce
 |
| Attenuator |
 Minus 20dB fixed and continuously variable
 |
| Waveform Characteristics: |

 |
| Sine wave |
 Flatness: plus/minus 0.3dB to 2MHz
Distortion: Less than 1 percent at 0.2Hz to 100KHz
 |
| Square wave |
 Rise and Fall time: Less than 25nSec
 |
| Triangle wave |
 Linearity: More than 99 percent at 0.2 Hz to 100 kHz
 |
| TTL/CMOS Output |
 TTL Output Level (H ≥ 2.4V L ≤ 0.4V)
CMOS Output Level: 5 to 15V plus/minus 1V
 |
| Symmetry Variation |
 1:1 to 10:1
 |
| Sweep Function Characteristic: |

 |
| Mode |
 Linear
 |
| Width |
 Variable from 1:1 to 100:1
 |
| Rate |
 0.5Hz to 50Hz- 20mSec to 2Sec
 |
| External VCF Input |
 Input Voltage: 0 to 10V
Input Impedance: Approx. 1010 KOmega
 |
| Frequency Counter Characteristic: |

 |
| Display |
 6 digit Green LED, Overflow, Gate time, MHz, kHz, Hz
 |
| Frequency Range |
 200mHz to 50MHz
 |
| Accuracy |
 Plus/minus Timebase Error plus/minus 1 Count
 |
| Input Sensitivity |
 100 mVrms
 |
| Time base |
 10 MHz
 |
| Max. Input Voltage |
 250 Vrms
 |
| General: |

 |
| Power Requirement |
 115 or 230 VAC plus/minus 10 percent, 48 to 66Hz
 |
| Operating Temperature |
 0 to 50 C; Accuracy specified at 25 plus/minus 5 C
 |
| Dimensions |
 240 X 270 X 95 mm
 |
| Weight |
 Approx. 2 kg
 |

Need Technical Advise? Please Call: 602-795-4033
Browse Similar Products |