Datasheet:  LM30-Specs |
 |
| Psiber Lanmaster 30 lm30 Outlet Identifier Description: |
Psiber Lanmaster 30 LM30 Outlet Identifier protects Equipment from Damage by Testing Outlet before Connecting a Device; verifies Connectivity to Far-End Equipment; identifies Type of LAN Connection - Ethernet, Fast Ethernet or Token Ring; identifies Type of Telecom Connection - Analog, PBX or ISDN; locates Unused/Disconnected Outlets.
The LanMaster LM30 Outlet Identifier provides LAN/Telecom Installers and Maintainers a tool to quickly test an unknown wall outlet and identify the type of circuit. Connecting equipment to an unknown outlet can damage NICs, modems, telephones or test equipment that do not have a compatible electrical interface. Some PBX systems can provide voltage and current levels that far exceed the limits of telecom or network devices resulting in equipment failure when connected. Knowing the type of signals present at an outlet not only protects against equipment damage, but also reduces troubleshooting time finding physical layer problems.
Psiber LanMaster LM30 scans all combinations of the eight wires connected to an RJ-45 outlet to identify the type of equipment connected to the far-end or warn of the detection of potentially harmful unknown signals. Identifying the outlet type with the unit eliminates guessing which is the correct outlet and wasting time tracing cables. In less than six seconds, the LanMaster 30 will identify a 10baseT Link, 100baseT Link, Token Ring Link, Analog Telephone Line, PBX Line, ISDN Line, warn of unidentified signals, or indicate no signals are present. The LanMaster LM 30 even indicates when a 10/100 Ethernet Link is configured for Auto-negotiation.
Managing network and telecom systems is easier and safer with a LanMaster LM30.
|
| Psiber Lanmaster 30 lm30 Outlet Identifier Characteristics: |
| |
Protect Equipment from Damage by Testing Outlet before Connecting a Device
|
| |
Verify Connectivity to Far-End Equipment
|
| |
Identify Type of LAN Connection - Ethernet, Fast Ethernet or Token Ring
|
| |
Identify Type of Telecom Connection - Analog, PBX or ISDN
|
| |
Locate Unused/Disconnected Outlets
|
| Psiber Lanmaster 30 lm30 Outlet Identifier Features: |
| Dimensions: |
6.8 in. x 1.4 in. x 1.3 in.
173 mm x 36 mm x 33 mm
|
| Weight: |
4.0 ounces
114 grams
|
| Outlet Signal Types |
100baseTX (IEEE 802.3u) 10baseT Token
|
| Power Supply |
One 9 volt alkaline battery
|
| Operating Temperature: |
0° to 50° C
|
| Storage Temperature: |
-10° to 55° C
|
| Outlet Signal Types |
100baseTX (IEEE 802.3u) 10baseT Token Ring (4Mbps and 16Mbps)Analog TelephonePBX TelephoneISDN (S/T-Interfaces and some U-Interfaces)(Not for use with 100baseT4 Equipment)
|
| Outlet Type |
RJ-45; RJ11/RJ-12 with patch cable and included coupler
|
| Test Features: |
*10T-10baseT Link
|
| |
TEL-Analog Phone Line
|
| |
PBX-Private Branch Exchange
|
| |
NO LINK - No Signals Detected
|
| |
*100T-100baseTX Link
|
| |
TR-Token Ring Link
|
| |
ISDN-ISDN Line
|
| |
SIGNAL-Unidentified Signals Detected
|
Need Technical Advise? Please Call: 602-795-4033
Browse Similar Products |
Testers and Tools 
