| Datasheet: |
 |
| Protek B8055 5Mz Function Generator Description: |
 Protek B8055 5Mz Function Generator. Product Discontinued. Replaced by FG-7005C.
 |
| Protek B8055 5Mz Function Generator Characteristics: |
| |
 5 Hz to 5 MHz Frequency range
 |
| |
 6 Frequency Ranges
 |
| |
 Sine, Square, Ramp and Pulse Waveforms
 |
| |
 Built in 30MHz Frequency counter
 |
| |
 Less than 1.0 percent Sine Wave distortion
 |
| |
 Variable Symmetry Control
 |
| |
 TTL Sync output
 |
| |
 VCF Input
 |
| |
 Greater than 60dB Attenuation
 |
| Protek B8055 5Mz Function Generator Specifications: |
| Output Characteristics |

 |
| Frequency Multipliers |
 X50, x500, x5K, x50K, x 500K, x5M
 |
| Output Level |
 ‰¥ 16V (no load);
≥ 8V (50ohm)
 |
| Attenuation |
 0dB, 20dB, 40dB + Amp
 |
| Waveforms |
 Sine, Square, Ramp and Pulse
 |
| Impedance |
 50ohm
 |
| DC Off set |
 0 to ± 8.0V (no load);
0 to ± 4.0 (50ohm)
 |
| Sine Wave |

 |
| Distortion |
 ‰¤ 1 percent from 20Hz to 20KHz
 |
| Flatness |
 ‰¤ ± 1dB
 |
| Square wave |

 |
| Rise/Fall Time |
 ‰¤ 30nS (into 50ohm)
 |
| Triangle |

 |
| Linearity |
 > 99 percent to 100KHz
 |
| Pulse |

 |
| Duty Cycle |
 Duty Cycles of 10 percent to 90 percent may be obtained by rotating the Duty cycle knob
 |
| TTL output |

 |
| Rise/Fall time |
 ± 50nS
 |
| Low level |
 = 0.4V
 |
| High level |
 = 3.5V
 |
| Impedance |
 100ohm
 |
| Frequency Counter |

 |
| Measuring range |
 0.5Hz to 30MHz
 |
| No. Of digits |
 6
 |
| Accuracy |
 = 0.1 percent + 1 count
 |
| Sensitivity |
 = 500mV RMS
 |
| Input Impedance: |
 100ohm
 |
| Max. Input |
 V 50V p-p
 |
| General Specifications |

 |
| Line Voltage |
 120/220V selectable
 |
| Dimensions |
 9 inch(W) x 3.3 inch(H) x 9.4 inch (D)
 |
| Weight |
 3.9lbs
 |
| Protek B8055 5Mz Function Generator Accessories Optional: |
| ProTek Accessories |
 BNC cable, Power cord, and operating manual
 |

Need Technical Advise? Please Call: 602-795-4033
Browse Similar Products |