Datasheet:  Fluke-FP-Plus |
 |
| Fluke Fp Plus FoodPro Plus Food Safety Thermometer Description: |
Fluke Fp Plus FoodPro Plus Food Safety Thermometer. Mfg part 2477950. The Fluke FoodPro Plus combines the same infrared surface temperature scanner, as well as a probe thermometer and integrated countdown timer for complete inspections of food temperatures and monitoring cooking and cooling intervals. The Fluke FoodPro Plus combines an infrared non-contact thermometer for surface scans with a probe thermometer for internal temperature readings. An integrated countdown timer with alarm monitors line checks as well as cooking and cooling intervals. Includes all of the FoodPro features, plus the following: Built-in fold-out probe for measuring internal food temperatures
Probe temperature range -40 to 200 degrees C
Countdown timer to monitor cooking, cooling and HACCP exposure times. Backlit display for clear readings in poorly lit areas. MAX temperature displayed for quick reference.
|
| Fluke Fp Plus FoodPro Plus Food Safety Thermometer Characteristics: |
| Includes all of the FoodPro features, plus the following: |
|
| |
Built-in fold-out probe for measuring internal food temperatures
|
| |
Probe temperature range -40 to 200 degrees C
|
| |
Countdown timer to monitor cooking, cooling and HACCP exposure times
|
| |
Backlit display for clear readings in poorly lit areas
|
| |
MAX temperature displayed for quick reference
|
| Fluke Fp Plus FoodPro Plus Food Safety Thermometer Applications: |
| Receiving: |
Use FoodPro Series thermometers to quickly verify proper temperatures of food products at the point of delivery as recommended by your HACCP program
|
| Food holding: |
Easily monitor hot and cold food holding
|
| Inspection: |
Conduct food line inspections daily to ensure compliance with local food temperature monitoring requirements
|
| Equipment Calibration: |
Verify proper operating temperature of coolers, freezers, grills, fryers, warmers, as well as hot and cold storage units to avoid inconsistent food service, costly spoilage and to allow quicker response, reducing equipment repair costs
|
| Dining room: |
Easily verify temperatures in every aspect of food serving to ensure safety, enhance quality and reduce waste
|
| Fluke Fp Plus FoodPro Plus Food Safety Thermometer Specifications: |
| Infrared Specifications |
|
| Temperature |
-35 degrees C to 275 degrees C
|
| Accuracy (Assumes ambient operating temperature of 23 degrees C ±2 degrees) |
Between 0 degrees C and 65 degrees C: ±1 degrees C
|
| |
Below 0 degrees C : ±1 degrees ±0.1 degree/degree
|
| |
Above 65 degrees C): ±1.5 percent of reading
|
| Response time |
<500 ms after initial reading
|
| Spectral Response |
8-14 microns
|
| Emissivity |
Pre-set for food service applications
|
| Distance to spot size/Optical Resolution (D:S) |
2.5:1 at 90 percent energy, typical
|
| Typical working range (target illumination) |
25 mm to 250 mm
|
| Minimum target size |
12 mm
|
| Illumination to IR channel offset |
13 mm
|
| Probe Specifications |
|
| Temperature |
-40 degrees C to 200 degrees C
|
| Accuracy (Assumes ambient operating temperature of 23 degrees C ±2degrees) |
Between –5 degrees C and 65 degrees C : ±0.5 degrees C
|
| |
Below –5 degrees C : ±1 degrees C
|
| |
Above 65 degrees C: ±1 percent of reading
|
| Response time |
7-8 seconds (3 time constants)
|
| Probe dimensions |
Diameter: 3.0 mm
Length: 90 mm
|
| Sensor type |
Thin-film platinum, class A, Resistance
Thermal device (RTD)
|
| Operational Specifications |
|
| Repeatability |
Within accuracy specifications of the unit
|
| Ambient operating range |
0 degrees C to 50 degrees C
|
| Relative Humidity |
90 percent (+/- 5 percent) RH non condensing at 30 degrees C
|
| Storage Temperature |
-20 degrees C to 60 degrees C
|
| Weight |
150 g (with battery)
|
| Dimensions |
165 mm x 32 mm x50 mm
|
| Power, battery life |
9 Volt alkaline
|
| Battery Life alkaline |
10 hours minimum at 23 degrees C
|
| Target illumination |
High Brightness LED
|
| Display Resolution |
4 digits, 0.1 degrees C
|
| Displayhold (7seconds) |
Yes
|
| LCD backlit display |
Yes
|
| Temperature display |
4 digits, 0.1 degrees C resolution
|
| Maximum temperature displayed |
Yes
|
| Timer |
Yes
|
| Environmental Data |
IP54 sealing (hand-washable, non-submersible)
|
| Other Specifications |
|
| Calibration Certificate |
Calibration accuracy with NIST and DKD traceability
|
| Standards |
Conforms to EN 61236-1 Electromagnetic Emissions and Susceptibility, EN 6101-1 General Safety, Sealing IP54 (hand washable, non-submersible)
|
| Certifications |
CE NSF
|
| Warranty |
2 years
|
| Options/Accessories |
FoodPro Plus Replacement probe
|
| |
At calibration geometry of 279 mm with a 140 mm diameter, 0.97 emissivity blackbody
|
| |
Specifications subject to change without notice
|
Need Technical Advise? Please Call: 602-795-4033
Browse Similar Products |
Testers and Tools 
