Datasheet:  Dent-PowerScout-PS18-D-Brochure Dent-Current-Transformers Dent-Energy-and-Electrical-Submetering |
 |
| Dent Instruments PowerScout PS18-D Networked Power Meter Description: |
Dent Instruments PowerScout PS18-D Networked Power Meter is a submetering device designed to provide timely and accurate consumption data necessary to gain the upper hand on electrical costs in today's escalating energy market.
Dent PowerScout PS18-D Networked Power Meter can capture kWh/kW energy and demand data as well as virtually all relevant energy parameters for diagnostics and monitoring on three-phase or single-phase circuit installations. Made in the USA.
Click here for Video: Dent Instruments PowerScout PS18-D
|
| Dent Instruments PowerScout PS18-D Networked Power Meter Applications: |
| |
Provide timely and accurate consumption data necessary to gain the upper hand on electrical costs
|
| |
Designed to capture kWh/kW energy and demand data as well as virtually all relevant energy parameters for diagnostics and monitoring on three-phase or single-phase circuit installations
|
| Dent Instruments PowerScout PS18-D Networked Power Meter Characteristics: |
| |
Over 50 measured parameters for energy measurement, monitoring and diagnostics
|
| |
Model PS3-D-US 3 channels, Model PS18-D 18 channels for multi-circuit or branch-circuit monitoring.
|
| |
Single or 3-phase energy and power meter for submetering applications
|
| |
Mix-and-match a full range of Split-Core or RoCoil Rogowski-style current transformers
|
| |
PhaseChek LED indicators ensure correct CT orientation during installation (patent pending)
|
| |
Line-Powered; 60-600V Phase-Phase Power Supply (Use on 120/240V, 208/120V, 480/277V, or 580/335V, 380/220 volt services; 50 or 60 Hz
|
| |
Equipped with industry-standard Modbus Communications
Data updates occur every 0.5 seconds
|
| |
ETL and CE Mark
|
| Dent Instruments PowerScout PS18-D Networked Power Meter Specifications: |
| Service Type |
Three Phase, Four Wire (WYE)
|
| 3 Voltage Channels |
CATIII 80-346 Volts AC Line-to-Neutral, 600V Line-to-Line
|
| Current Channels |
PS3 3 channels: 0-5,000+ Amps depending on current transformer
PS18 18 channels: 0-5,000+ Amps depending on current transformer
|
| Measurement Type |
True RMS using high-speed digital signal processing (DSP
|
| Line Frequency |
50/60Hz, DC
|
| Waveform Sampling |
13 kHz
|
| Measurements |
Volts, Amps, kW, kWh, kVAR, kVARh, kVA, kVAh, Apparent Power Factor (aPF), Displacement Power Factor (dPF). All parameters for each phase and for system total.
|
| Accuracy |
Better Than 1% (<0.5% typical) for V, A, kW, kVAR, kVA, PF
|
| Resolution |
1 Amp, 1 Volt, 1 watt, 1 VAR, 1 VA, 0.01 Power Factor Depending on scaling setting
|
| Indicators |
24 bi-color LEDs (red and green): 4 LEDs per each watt metering element. Each element has 1 LED to indicate communication and 3 LEDs for correct phasing (Green when voltage and current on the on the same phase; Red when incorrectly wired. Patent pending.)
|
| Communication: |
|
| Direct |
Modbus over RS-485
|
| Modbus Framing |
RTU (binary)
|
| Communication Rate |
9600 baud
|
| Data Bits |
8
|
| Parity |
None
|
| Stop Bit |
1
|
| Data Formats |
Modbus Protocol
|
| Power |
From L1 Phase to L2 Phase. PS 18: 5 Watts typ. @ 600VAC, 2.5W typ. @ 80VAC; non-user replaceable .5 Amp Internal fuse protection
|
| Mechanical: |
|
| Operating Temperature |
-7 to + 60 oC (20 to 140 oF)
|
| Humidity |
5% to 95% non-condensing
|
| Enclosure |
Optional NEMA 4 rated, ABS plastic, 94-V0 Flammability Rating
|
| Dimensions |
Approx. 6" X 10" (15 X 25 cm) Circuit Board Only, PowerScout 18
|
| Weight |
0.4 kg (11 ounces) Exclusive of CTs
|
Need Technical Advise? Please Call: 602-795-4033
Browse Similar Products |
Testers and Tools 
