| Datasheet: |
 |
| BI Communications TX6000 TDR Cable Fault Locator Description: |
 BI Communications TX6000 TDR Cable Fault Locator is designed for identifying and locating faults on all metallic cables with two or more insulated conductors.

This cable fault locator TDR is a hand held Time Domain Reflectometer with 11 range scales up to 6000m(6km). Made in England.
 |
| BI Communications TX6000 TDR Cable Fault Locator Characteristics: |
| |
 USB 2.0 Interface with a Windows compatible software TraceXtra to download/analyse traces
 |
| |
 Rugged Palm-Top design
 |
| |
 Weighs less than 350g (12oz)
 |
| |
 11 Measurement Ranges up to 6000m(6km)
 |
| |
 25, 50, 75 & 100ohm Selectable Cable Impedance
 |
| |
 Memory capacity up to 50 saved traces
 |
| |
 Built in Tone Generator for Pair Tracing and Identification
 |
| |
 Suitable for testing all Communication and Power Cables
 |
| |
 Environmental Protection IP54
 |
| |
 CE Approved
 |
| Includes: |
 Soft bag and Test Leads
 |
| BI Communications TX6000 TDR Cable Fault Locator Specifications: |
| Ranges |
 Meters 7, 15, 30, 60, 120, 250, 500, 1km, 2km, 3km, 6km
feet 23, 49, 98, 197, 394, 820, 1640, 3280, 6560, 9850, 19000
 |
| Range Selection |
 Manual range control
 |
| Accuracy |
 1% of selected range
 |
| Resolution |
 Approx 1% of range
 |
| Sensitivity |
 Min 3 pixel return at 4km on 0,6mm , PE , TP
 |
| Velocity Factor |
 Adjustable from 1% to 99%
 |
| Output Pulse |
 5 volts peak to peak. Into open circuit
 |
| Output Impedance |
 Selectable 25, 50, 75 & 100 ohms
 |
| Output Pulse Width |
 3 ns to 3 ms, Automatic with range
 |
| Scan Rate |
 2 scans / second or scan held (not on 3km/6km range)
 |
| Tone Generator |
 810 - 1100Hz
 |
| Battery Life |
 60 hours continuous scanning
 |
| Power Supply |
 6 volts 4 x 1.5 AA Alkaline cells
 |
| Power Down |
 Selectable 1, 2, 3, 5 minutes or disabled
 |
| Back Lit Display |
 128 x 64 pixel
 |
| Voltage Detection |
 250 volts AC
 |
| Operating Temp |
 -10 C / 50 C
 |
| Storage Temp |
 -20 C / 70 C
 |
| Safety |
 IEC 61010-1, EN 60950, EMC BS/EN 61326-1, IP54
 |
| Dimensions |
 165 x 90 x 37mm (6.5 x 3.5 x 1.5 ins)
 |
| Weight |
 350 gms (12oz)
 |

Need Technical Advise? Please Call: 602-795-4033
Browse Similar Products |