Datasheet: BI Communications TX2001 Graphical TDR Cable Fault |
 |
| BI Communications TX2001 Graphical TDR Cable Fault Locator Description: |
 BI Communications TX2001 Graphical TDR Cable Fault Locator is a professional Time Domain Reflectometer tester designed to detect and locate faults on copper communication cables up to a distance of 3000m (10,000ft).

Advanced signal processing techniques enable the TX2001 to find opens, short circuits, splices, taps, water ingress and other more elusive impedance mismatches. A built in oscillator also provides a tone for pair tracing and identification.

Selectable cable impedance matching, along with variable velocity factor, enable the TX2001 to be used to test all communication cables, including twisted pair and coaxial, with graphical results and fault distances displayed on a dot matrix LCD. The TDR/Toner is housed in a tough, ruggedised ABS plastic moulding, water and dust proof to IP54, and supplied complete with test leads and a protective tool-belt holster.

BI Communications TX2001 Graphical TDR Cable Fault Locator is designed and manufactured to international standards for quality, safety and reliability. Made in England.
 |
| BI Communications TX2001 Graphical TDR Cable Fault Locator Characteristics: |
| |
 "The smallest graphical TDR in the world”
 |
| |
 Industry First - Combined Graphical TDR / Toner
 |
| |
 Palm-Top design weighs less than 350g (12oz)
 |
| |
 5 Measurement Ranges up to 3000m (10,000ft)
 |
| |
 50, 75 & 100 Ohm Selectable Cable Impedance
 |
| |
 Rugged Enclosure - Water and Dust Proof to IP54
 |
| |
 Complete with tool-belt holster and test leads
 |
| |
 Low cost Full Specification Graphical TDR/Toner
 |
| |
 Suitable for testing all Communication Cables
 |
| |
 Built in Tone Generator for Pair tracing and Identification
 |
| BI Communications TX2001 Graphical TDR Cable Fault Locator Specifications: |
| Ranges at Vp=70% |
 600, 1200, 2400, 4800 & 9600ft (180, 360, 720, 1440 & 2880m)
 |
| Range Selections |
 Automatic range control
 |
| Resolution |
 Approximately 1% of range
 |
| Sensitivity |
 Min. 3 pixel return at 2 km (6 kft)
 |
| Velocity Factor |
 Adjustable from 1% to 99%
 |
| Output Pulse |
 5v p-p into open circuit
 |
| Output Impedance |
 Selectable 50, 75 & 100 ohms
 |
| Output Pulse Width |
 25ns min. 1.6us max.
 |
| Scan Rate |
 5 scans per second
 |
| Tone Generator |
 Oscillating 810 - 1110Hz
 |
| Power |
 6v 4 x AA cells
 |
| Power Down |
 3 Minutes
 |
| Dimensions |
 6.6" x 3.6" x 1.5" (165 x 90 x 37mm)
 |
| Weight |
 350gms (12oz)
 |
| Safety |
 IEC61010-1, EN60950, CE, BS/EN61326-1, IP54
 |

Need Technical Advise? Please Call: 602-795-4033
Browse Similar Products |