| Datasheet: |
 |
| Amprobe FG2C-UA Sweep Function Generator Description: |
 Amprobe FG2C-UA Sweep Function Generator, a two function generator, provides a substantial array of output capabilities. It is extremely reliable for heavy day-to-day usage in electronic troubleshooting, production manufacturing, test, or as a breadboarding signal source.

Amprobe FG2C-UA Function Generator supplies all the basic test waveforms for fast, easy push-button selection of square, triangle and sine waves plus TTL or CMOS pulse output with low impedance, low distortion output. Smooth, analog knob dials frequency between 0.3Hz and 3MHz. Vary the output from less than 20mVp-p to 20Vp-p open circuit (10Vp-p max 50W load). Duty cycle control allows for setting pulses positive or negative. The VCF input allows external control for generating sweep signals.
Discontinued product.
 |
| Amprobe FG2C-UA Sweep Function Generator Characteristics: |
| |
 Square, Triangle, Sine waves, TTL and CMOS pulse outputs
 |
| |
 0.3 Hz to 3 MHz range
 |
| |
 Duty-cycle control
 |
| |
 Variable controlled frequency (VCF) input
 |
| |
 Variable output
 |
| |
 2 switchable 20 dB attenuators
 |
| |
 Variable DC offset control
 |
| |
 Signal polarity invert button
 |
| |
 Ships with both 117V and 220V line cords and fuses
 |
| Amprobe FG2C-UA Sweep Function Generator Specifications: |
| Main |
 Frequency Range 0.3 Hz to 3 MHz (7 ranges)
Amplitude > 10 Vpp (into 50 Ω load)
Impedance 50 Ω ± 10 %
Attenuator (knob) -20 dB ± 1 dB
Attenuator (button) -20 dB ± 1 dB
DC Offset < -5 V to > +5 V (into 50 Ω load)
Duty-Cycle Control 80 %:20 %:80 % to 1 MHz; continuously variable
Range Accuracy ± 5 %, + 1 Hz (@ 3.0 position)
 |
| Sine Wave |
 Distortion ≤ 1 %, 0.3 Hz to 200 kHz
THD < 35 dB below fundamental in all ranges
(Specification applied from MAX. to 1/10 level)
Flatness < 0.3 dB, 0.3 Hz to 300 kHz; < 0.5 dB, 300 kHz to 3 MHz
 |
| Triangle Wave |
 Linear ≥ 98 %, 0.3 Hz to 100 kHz; ≥ 95 %, 100 kHz to 3 MHz
 |
| Square Wave |
 Symmetry ± 2 %, 0.3 Hz to 100 kHz
Rise or Fall Time ≤ 100 ns at maximum output (into 50 Ω load)
 |
| CMOS Output |
 Level 4 Vpp,± 1 Vpp to 14.5 Vpp± 0.5 Vpp adjustable
Rise or Fall Time ≤ 120 ns
 |
| TTL Output |
 Level ≥ 3 Vpp
Fan Out 20 TTL load
Rise or Fall Time ≤ 25 ns
 |
| VCF |
 Input Voltage -10 to +10, ± 1 V (100:1)
Input Impedance 10 kΩ,± 10 %
 |
| Storage Environment |
 -10 ºC to 70 ºC@70 %R.H.
 |
| Power Source |
 115 VAC or 230 VAC, ± 15 %; 50/60 Hz
 |
| Operating Environment |
 For indoor use,altitude up to 2000 M, 0 ºC to 40 ºC, 80 %RH
 |
| Dimensions (W x H x D) |
 243 mm x 93 mm x 292 mm (9.57˝ x 3.66˝ x 11.5˝)
 |
| Weight |
 2.0 kgs (4.4 lbs)
 |
| Safety Approvals |
 EN61010-1, Cat. II, Pollution degree 2
 |
| Warranty |
 One-year
 |

Need Technical Advise? Please Call: 602-795-4033
Browse Similar Products |