Datasheet: AM-110TRMS-Specs |
 |
| Amprobe AM-110 TRMS Digital Multimeter Description: |
 Amprobe AM-110 TRMS Digital Multimeter comes equipped with: TRMS Measurement, BEEP-JACK audible warning against improper connection, Peak hold (30ms response time), Auto and manual ranging, etc. Discontinued Product, Replaced by Amprobe AM-140-A Digital TRMS Multimeter.
 |
| Amprobe AM-110 TRMS Digital Multimeter Characteristics: |
| |
 BEEP-JACK audible warning against improper connection
 |
| |
 Peak hold (30ms response time)
 |
| |
 Auto and manual ranging
 |
| |
 Relative zero mode
 |
| |
 Auto power off
 |
| |
 Data hold
 |
| |
 Large, easy to read LCD display
 |
| |
 Diode test
 |
| |
 Audible continuity
 |
| |
 Backlight display
 |
| Amprobe AM-110 TRMS Digital Multimeter Features: |
| UPC/DCI: |
 11961
 |
| Instruction Manual: |
 Yes
 |
| Detailed Specs: |
 Yes
 |
| Hi-Resolution Image: |
 Yes
 |
| Capacitance: |
 50 0.0nF, 5.000/50.00/500.0/3000μF +/-(3.5% Rdg + 6 LSD)
 |
| Amprobe AM-110 TRMS Digital Multimeter Specifications: |
| TRMS: |
 Yes
 |
| AC Voltage: |
 400.0mV, 4.000/40.00/400.0/1000V +/-(1.5% Rdg + 5 LSD) @ 4V - 400V ranges **
 |
| DC Voltage: |
 400.0mV, 4.000/40.00/400.0/1000V +/-(0.5% Rdg + 3 LSD) @ 4V - 400V ranges **
 |
| Resistance: |
 400.0Ω, 4.000/40.00/400.0kΩ, 4.000/40.00MΩ +/-(0.8% Rdg + 6 LSD)
 |
| AC/DC Current: |
 400.0/4000μA, 40.00/400.0mA, 4.000/10.00A +/-(2.0% Rdg + 6 LSD)
 |
| Frequency: |
 5.000/50.00/500.0Hz, 5.000/50.00kHz, 500.0/1.000MHz +/-(0.5% Rdg + 4 LSD)
 |
| Temperature: |
 -4 to 572 Degrees F (-20 to 300 Degrees C) +/-(2.0% Rdg + 6 Degrees F) +/-(2.0% Rdg + 3 Degrees C)
 |
| Back light display: |
 Yes
 |
| Advantages of TRMS version: |
 For most applications, the TRMS version of the multimeter is recommended in order to avoid large measuring errors. If uncertain, always choose TRMS version to assure measuring accuracy for all your applications.
 |
| |
 TRMS technology assures accurate measurements, regardless of a distortion of the signal.
 |
| |
 The distortion of the voltage or current is caused in most cases by "Non-linear" loads for example: Electronics (radios, VCRs, computers, TV sets, etc�), Light dimmers, Variable Frequency Drives (VFDs), Adjustable Speed Drives (ASDs)
 |
| |
 The distorted wave is transmitted across the power lines and it affects all electrical equipment connected to the same system.
 |

Need Technical Advise? Please Call: 602-795-4033
Browse Similar Products |