Datasheet:  8230-AEMC |
 |
| AEMC 8230 Single-Phase Power Quality Analyzer Description: |
AEMC 8230 Single-Phase Power Quality Analyzer is a single-phase power quality analyzer that is easy-to-use, compact and shock-resistant. It is intended for technicians and engineers to measure and carry out diagnostic work and power quality work on single- or three-phase balanced load networks.
Users are able to obtain instant waveforms of an electrical network’s principal characteristics, and also monitor their variation over a period of time.
The multi-tasking measurement system simultaneously handles all the measurement functions and waveform display of the various magnitudes, detection, continuous recordings and their display without any constraints.
|
| AEMC 8230 Single-Phase Power Quality Analyzer Applications: |
| |
Motor start-up analysis
|
| |
Verification of power distribution circuits
|
| |
Measurement and recording of power system quality (kW, VA, VAR)
|
| |
Energy metering (kVAh, VARh, kWh)
|
| |
In-plant troubleshooting of power distribution panels and individual machinery
|
| |
Determine harmonic problems originating from source or load
|
| AEMC 8230 Single-Phase Power Quality Analyzer Characteristics: |
| |
Measures up to 660Vrms or VDC
|
| |
Measures up to 6500AAC or 1400ADC (probe dependent)
|
| |
Displays Min, Max and Average Volts and Amps, Crest Factor, Peak value and K-Factor
|
| |
Calculates and displays Watts, VARs and VA, Power Factor and Displacement Power Factor for single-phase and balanced three-phase
|
| |
Displays total harmonic distortion (THD-F and THD-R) for voltage and current
|
| |
Displays individual harmonic values and % for Volts and Amps through the 50th harmonic
|
| |
Captures, displays and stores inrush current waveforms and statistics
|
| |
Stores up to eight screen captures
|
| |
Stores up to 1MB of trend recorded data
|
| |
Configurable from DataView® software or front panel
|
| |
Download stored data to DataView® software via optical with isolated USB port
|
| |
Captures up to 4096 alarm events using up to 10 different thresholds
|
| |
Displays and records up to 17 different power quality parameters
|
| |
Includes DataView® software FREE
|
| AEMC 8230 Single-Phase Power Quality Analyzer Specifications: |
| Electrical Specifications: |
|
| Voltage (TRMS) |
Phase-to-Phase: 660V
Phase-to-Neutral: 600V
|
| Current (TRMS) |
MN Clamp: 5mA to 100mA/120A or 2 to 240A
MR Clamp: 10 to 1000Aac, 10 to 1400Adc
SR Clamp: 3 to 1200A
AmpFlex: 10 to 6500A
|
| Frequency (Hz) |
40 to 70Hz
|
| Other Measurements |
KW, kVAR, PF, DPF, kWh, kVARh, kVAh, K-Factor, Flicker, Harmonic Phase Shift, Phase Rotation
|
| Harmonics THD-R, THD-F, V, A, VA |
1st to 50th, Direction, Sequence
|
| Sampling Frequency |
256 Samples/cycle
|
| Data Storage |
1.5MB partitioned for waveforms, alarms, and trend recording
|
| Power Source |
Six NiMH AA rechargeable battery pack
AC Supply: 120/230Vac (50/60Hz)
|
| Battery Life |
≥ 8 hours with display on
≥ 40 hours with display off (recording mode)
|
| Mechanical Specifications: |
|
| Communication Port |
Optically isolated USB
|
| Display |
1/4 VGA (320 x 240) color LCD
|
| Dimensions |
8.3 x 4.3 x 2.4 in (211 x 108 x 60 mm)
|
| Weight |
1.9 lbs (0.88kg)
|
| Safety Rating |
EN 61010, 600V Cat. III, IP 54, Pollution Degree 2
|
Need Technical Advise? Please Call: 602-795-4033
Browse Similar Products |
Testers and Tools 
